Multi-acrylamides improve bond stability through collagen reinforcement under physiological conditions.

OBJECTIVES: Acrylamides were shown to significantly improve bonding stability in adhesive restorations, but the reinforcement mechanism has not been fully elucidated. We tested the hypothesis that hydrogen bonding reinforcement of the collagen network (with secondary or tertiary acrylamides), as well as degree of crosslinking of the polymer network (with di- or tri-functional acrylamides), can be two of the factors at play. METHODS: Two-step total etch adhesives comprising UDMA (60 wt%) and 40 wt% of: TAAEA, TMAAEA (secondary, tertiary tri-acrylamides), BAAP, DEBAAP (secondary, tertiary di-acrylamides) or HEMA (mono-methacrylate - control) were formulated. Simulated composite restorations (n = 5) were tested after cyclic mechanical and biological (S. mutans biofilm) challenges. Gap formation before and after aging was assessed with SEM imaging. Micro-tensile bond strength (µTBS, n = 6) was assessed after seven-day incubation in water or S. mutans-containing culture medium. Collagen reinforcement was assessed with hydroxyproline assay (n = 10) and rheology (n = 3). Data were analyzed with one-way/two-way ANOVA/Tukey's test (alpha=5%). RESULTS: Gap formation increased and bond strength decreased for all monomers after biofilm incubation (p < 0.001). Except for DEBAAP, secondary and tertiary di/tri-acrylamides showed lower occlusal gap width values, but no significant differences overall gap length compared to HEMA. µTBS increased for tri-acrylamides compared with HEMA. Samples treated with multi-acrylamides had lower concentration of hydroxyproline (by-product of collagen degradation) (p < 0.001), except for DEBAAP, which showed values close to HEMA (p > 0.05). Dentin shear modulus increased for all acrylamides after 72 h, especially TMAAEA. SIGNIFICANCE: In general, multi-acrylamides promote collagen reinforcement, leading to reduced gap formation, and stabilize the bond strength under physiological conditions.

Revisiting gas-chromatography/mass-spectrometry molar response factors for quantitative analysis (FID or TIC) of glycosidic linkages in polysaccharides produced by oral bacterial biofilms.

Methylation analysis was performed on methylated alditol acetate standards and Streptococcus mutans extracellular polymeric substances (EPS) produced from wild-type and Gtf knockout strains (∆GtfB, ∆GtfB, and ∆GtfD). The methylated alditol acetate standards were representative of glycosidic linkages found in S. mutans EPS and were used to calibrate the GC-MS system for an FID detector and MS (TIC) and produce molar response factor, a necessary step in quantitative analysis. FID response factors were consistent with literature values (Sweet et al., 1975) and found to be the superior option for quantitative results, although the TIC response factors now give researchers without access to an FID detector a needed option for molar response factor correction. The GC-MS analysis is then used to deliver the ratio of the linkage types within a biofilm.

Dual receptor-sites reveal the structural basis for hyperactivation of sodium channels by poison-dart toxin batrachotoxin.

The poison dart toxin batrachotoxin is exceptional for its high potency and toxicity, and for its multifaceted modification of the function of voltage-gated sodium channels. By using cryogenic electron microscopy, we identify two homologous, but nonidentical receptor sites that simultaneously bind two molecules of toxin, one at the interface between Domains I and IV, and the other at the interface between Domains III and IV of the cardiac sodium channel. Together, these two bound toxin molecules stabilize α/π helical conformation in the S6 segments that gate the pore, and one of the bound BTX-B molecules interacts with the crucial Lys1421 residue that is essential for sodium conductance and selectivity via an apparent water-bridged hydrogen bond. Overall, our structure provides insight into batrachotoxin's potency, efficacy, and multifaceted functional effects on voltage-gated sodium channels via a dual receptor site mechanism.

History of incarceration and age-related neurodegeneration: Testing models of genetic and environmental risks in a longitudinal panel study of older adults.

History of incarceration is associated with an excess of morbidity and mortality. While the incarceration experience itself comes with substantive health risks (e.g., injury, psychological stress, exposure to infectious disease), most individuals eventually return from prison to the general population where they will be diagnosed with the same age-related conditions that drive mortality in the non-incarcerated population but at exaggerated rates. However, the interplay between history of incarceration as a risk factor and more traditional risk factors for age-related diseases (e.g., genetic risk factors) has not been studied. Here, we focus on cognitive impairment, a hallmark of neurodegenerative conditions like Alzheimer's disease, as an age-related state that may be uniquely impacted by the confluence of environmental stressors (e.g., incarceration) and genetic risk factors. Using data from the Health and Retirement Study, we found that incarceration and APOE-ε4 genotype (i.e., the chief genetic risk factor for Alzheimer's disease) both constituted substantive risk factors for cognitive impairment in terms of overall risk and earlier onset. The observed effects were mutually independent, however, suggesting that the risk conveyed by incarceration and APOE-ε4 genotype operate across different risk pathways. Our results have implications for the study of criminal-legal contact as a public health risk factor for age-related, neurodegenerative conditions.

Atypical Presentation of a Preexisting Pancreatic Pseudocyst with Glucagon-Like Peptide-1 Agonist as a Possible Trigger for Exacerbation: A Case Report.

Pancreatitis encompasses pancreatic tissue inflammation due to enzymatic autodigestion, leading to complications such as pancreatic pseudocysts. This report details a case in which the administration of glucagon-like peptide-1 (GLP-1) agonists rendered a regressing, asymptomatic pseudocyst symptomatic. We posit that, absent other triggers, GLP-1 agonists might exacerbate pseudocysts. This emphasizes timely diagnosis and proper management. Our investigation delves into patient-specific nuances, potential mechanistic insights, the need to study this phenomenon among a broader cohort, alternative pathologies, long-term consequences, and clinical ramifications in response to a shifting pseudocyst behavior.

Invasive Sinusitis With Arcanobacterium haemolyticum and Fusobacterium necrophorum Complicated by Subdural Empyema in an Immunocompetent Adolescent Patient.

We are reporting a very rare case of an invasive infection with Arcanobacterium haemolyticum and Fusobacterium necrophorum that resulted in meningitis, cerebral edema, and subdural empyema secondary to upper respiratory infection (URI) and sinusitis in an immunocompetent adolescent patient. Our patient is a 17-year-old male with no significant medical history who presented to his pediatrician with a fever for three days, was diagnosed with a viral URI, and instructed to continue symptomatic care. Seven days later, the patient developed a headache, left-sided weakness, and continued to spike fever. The patient presented to the Emergency Center due to altered mental status, worsening left-sided weakness, and difficulty speaking. Head computed tomography (CT) scan showed small right-sided fluid collection with right-to-left midline shift and marked opacification of paranasal sinuses with air-fluid levels in frontal sinuses. The patient underwent an emergent craniotomy that revealed subdural empyema under high pressure and was started on vancomycin, cefepime, metronidazole, and levetiracetam. Six hours after his craniotomy, the patient developed fixed dilatation of his right-side pupil and a head CT scan showed developing ischemic changes and increased in his midline shift which prompted to emergent right decompressive craniectomy. The following day of his surgery, magnetic resonance imaging of the brain showed large acute infarctions of the right hemisphere, edema, and subfalcine herniation. Two brain death exams - 12 hours apart - were performed in which criteria for brain death were met. The patient's subdural empyema culture grew Fusobacterium necrophorum and Arcanobacterium haemolyticum.

Microbiome imaging goes à la carte: Incorporating click chemistry into the fluorescence-activating and absorption-shifting tag (FAST) imaging platform.

The human microbiome is predominantly composed of facultative and obligate anaerobic bacteria that live in hypoxic/anoxic polymicrobial biofilm communities. Given the oxidative sensitivity of large fractions of the human microbiota, green fluorescent protein (GFP) and related genetically-encoded fluorophores only offer limited utility for live cell imaging due the oxygen requirement for chromophore maturation. Consequently, new fluorescent imaging modalities are needed to study polymicrobial interactions and microbiome-host interactions within anaerobic environments. The fluorescence-activating and absorption shifting tag (FAST) is a rapidly developing genetically-encoded fluorescent imaging technology that exhibits tremendous potential to address this need. In the FAST system, fluorescence only occurs when the FAST protein is complexed with one of a suite of cognate small molecule fluorogens. To expand the utility of FAST imaging, we sought to develop a modular platform (Click-FAST) to democratize fluorogen engineering for personalized use cases. Using Click-FAST, investigators can quickly and affordably sample a vast chemical space of compounds, potentially imparting a broad range of desired functionalities to the parental fluorogen. In this work, we demonstrate the utility of the Click-FAST platform using a novel fluorogen, PLBlaze-alkyne, which incorporates the widely available small molecule ethylvanillin as the hydroxybenzylidine head group. Different azido reagents were clicked onto PLBlaze-alkyne and shown to impart useful characteristics to the fluorogen, such as selective bacterial labeling in mixed populations as well as fluorescent signal enhancement. Conjugation of an 80 Å PEG molecule to PLBlaze-alkyne illustrates the broad size range of functional fluorogen chimeras that can be employed. This PEGylated fluorogen also functions as an exquisitely selective membrane permeability marker capable of outperforming propidium iodide as a fluorescent marker of cell viability.

The potential use of glycosyl-transferase inhibitors for targeted reduction of S. mutans biofilms in dental materials.

Streptococcus mutans is the primary oral caries-forming bacteria, adept at producing "sticky" biofilms via the synthesis of insoluble extracellular polysaccharides (EPS), catalyzed by glucosyltransferases (GTFs). To circumvent the use of broad-spectrum antibiotics to combat these bacteria, this study sought to modify existing EPS-targeting small molecules with the ultimate goal of producing anti-biofilm polymer surfaces specifically targeting S. mutans. To achieve this, a known GTF inhibitor (G43) was modified with methoxy or tetraethyleneglycol substitutions in different positions (nine derivatives, tested at 50-µM) to pinpoint potential sites for future methacrylate functionalization, and then assessed against single-species S. mutans biofilms. As expected, the compounds did not diminish the bacterial viability. In general, the compounds with methoxy substitution were not effective in reducing EPS formation, whereas the tetraethyleneglycol substitution (G43-C3-TEG) led to a decrease in the concentration of insoluble EPS, although the effect is less pronounced than for the parent G43. This aligns with the reduced GTF-C activity observed at different concentrations of G43-C3-TEG, as well as the consequent decrease in EPS formation, and notable structural changes. In summary, this study determined that G43-C3-TEG is non-bactericidal and can selectively reduce the biofilm formation, by decreasing the production of EPS. This molecule will serve to functionalize surfaces of materials to be tested in future research.

Prison Adjustment Among Military Veterans: The Impact of Traumatic Events, Service History, and PTSD.

Military veterans have been shown to differ demographically from non-veterans in the criminal justice system. However, relatively little is known about their psychological adjustment, institutional misbehavior, and the efficacy of programing received while incarcerated. Using data taken from a national sample of prison inmates, this study investigates how traumatic events experienced during military service can impact the intensity of negative affect among veterans. Additionally, we examine whether prison misconduct is influenced by military service history and the receipt of substance abuse treatment. Controlling for a host of relevant variables, our results indicate that traumatic events show a significant effect on psychological adjustment only indirectly through veterans who developed post-traumatic stress disorder and that misconduct is lower among those who received an honorable discharge. Overall, these findings suggest that the ability of veterans to resist adverse outcomes may depend on a variety of factors both within and outside the prison environment.

Thiol Quantification Using Colorimetric Thiol-Disulfide Exchange in Nonaqueous Solvents.

A careful analysis of two (thiol-disulfide exchange) thiol quantification chromophores' behavior (Ellman's reagent and Aldrithiol-4) in nonaqueous solvents is presented. A wide range of kinetic profiles and response factors were measured to exhibit a large variance for nonaqueous systems. We report several robust benchtop and room-temperature methods using different organic solvents compared to aqueous conditions. Validation of analytical analyses in nonaqueous systems and quantification of the cysteine content of ovalbumin are also presented. This work serves as a treatise on the utilization of thiol-disulfide exchange chromophores under nonaqueous conditions for the quantification of thiols.

Synergistic Steric and Electronic Effects on the Photoredox Catalysis by a Multivariate Library of Titania Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti6O9[links]3, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti6O9(CO2)6]∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.

Parental Discipline and Child Psychosocial Outcomes in Iraq and Kurdistan: Evidence From a Nationally Representative Sample.

Few empirical studies have been conducted on populations in the Middle-East, particularly in Iraq and Iraqi Kurdistan, regarding the relationships between the type of discipline used by caregivers and its subsequent effect on children. Our analyses, which are based on data from the Iraq Multi-Cluster Survey 2018, replicate the prior work of scholars using Western samples, and suggest that variation in parental practices pertaining to the discipline of children is a robust predictor of several negative psychosocial outcomes among Iraqi and Kurdish youth. Specifically, we found that children who were subjected to various forms of violent physical discipline, psychological aggression, and neglectful parenting were more likely to exhibit an array of symptoms of psychosocial disorder, relative to measures of adequate parenting. Our analyses also provide strong support for the presence of comorbid psychosocial outcomes among Iraqi and Kurdish youth that stem from differences in the practice of parental discipline. The results of the current study are discussed regarding both theoretical and practical applications. The study's limitations are also addressed and suggestions for future research on the discipline-outcome nexus are given.

Sports- and Physical Activity-Related Concussions, Binge Drinking and Marijuana Use among Adolescents: The Mediating Role of Depression and Suicidal Ideation.

BACKGROUND: Although past studies have examined the adverse impact of sports- and physical activity-related concussions (SPACs) on health and mental health outcomes, there is a dearth of research investigating the association between SPACs and binge drinking and marijuana use. OBJECTIVE: The objective of this study is to examine the cross-sectional association between SPACs and binge drinking and marijuana use among adolescents and whether symptoms of depression and suicidal ideation mediate this association. METHODS: Data for this study came from the 2017 and 2019 National Youth Risk Behavior Survey. An analytic sample of 17,175 adolescents aged 14-18 years (50.2% male) was analyzed using binary logistic regression. RESULTS: Of the 17,175 adolescents, 13.7% engaged in binge drinking and 19.3% used marijuana 30 days preceding the survey date. Approximately one in seven (14.1%) adolescents had SPACs during the past year. Upon controlling for the effects of other factors, adolescents who had SPACs had 1.74 times higher odds of engaging in binge drinking (AOR = 1.74, p<.001, 95% CI = 1.47-2.06) and 1.42 times higher odds of using marijuana (AOR = 1.42, p<.001, 95% CI = 1.24-1.62) than those who did not have SPACs. Symptoms of depression and suicidal ideation explained 12% of the association between SPACs and binge drinking, and 19% of the association between SPACs and marijuana use. CONCLUSIONS: Understanding the association between SPACs and substance use and mental health could contribute to early identification of adolescents who may engage in substance use.

Effect of side-group methylation on the performance of methacrylamides and methacrylates for dentin hybridization.

The stability of the bond between polymeric adhesives to mineralized substrates is crucial in many biomedical applications. The objective of this study was to determine the effect of methyl substitution at the α- and ß-carbons on the kinetics of polymerization, monomer hydrolytic stability, and long-term bond strength to dentin for methacrylamide- and methacrylate-based crosslinked networks for dental adhesive applications. METHODS: Secondary methacrylamides (α-CH3 substituted=1-methyl HEMAM, ß-CH3 substituted=2-methyl HEMAM, and unsubstituted=HEMAM) and OH-terminated methacrylates (α- and ß-CH3 mixture=1-methyl HEMA and 2-methyl HEMA, and unsubstituted=HEMA) were copolymerized with urethane dimethacrylate. The kinetics of photopolymerization were followed in real-time using near-IR spectroscopy. Monomer hydrolysis kinetics were followed by NMR spectroscopy in water at pH 1 over 30 days. Solvated adhesives (40 vol% ethanol) were used to bond composite to dentin and microtensile bond strength (µTBS) measured after 24h and 6 months storage in water at 37°C. RESULTS: The rate of polymerization increased in the following order: OH-terminated methacrylates≥methacrylamides>NH2-terminated methacrylates, with minimal effect of the substitution. Final conversion ranged between 79% for 1-methyl AEMA and 94% for HEMA. 1-methyl-HEMAM showed the highest and most stable µTBS, while HEMA showed a 37% reduction after six months All groups showed measurable degradation after up to 4 days in pH 1, with the methacrylamides showing less degradation than the methacrylates. Additionally, transesterification products were observed in the methacrylamide groups. SIGNIFICANCE: Amide monomers were significantly more stable to hydrolysis than the analogous methacrylates. The addition of a α- or ß-CH3 groups increased the rate of hydrolysis, with the magnitude of the effect tracking with the expected base-catalyzed hydrolysis of esters or amides, but opposite in influence. The α-CH3 substituted secondary methacrylamide, 1-methyl HEMAM, showed the most stable adhesive interface. A side reaction was observed with transesterification of the monomers studied under ambient conditions, which was not expected under the relatively mild conditions used here, which warrants further investigation.

The Effects of Traumatic Brain Injury and Post-Traumatic Stress Disorder on Prison Adjustment and Recidivism among Military Veterans: Evidence from Minnesota.

The prevalence of, and link between, mental health disorders-such as traumatic brain injury (TBI) and post-traumatic stress disorder (PTSD)-and antisocial behavior is well-documented among the military veteran population. Studies also show that TBI and PTSD account for variation in prison-based and re-entry outcomes. Despite this body of research, comparatively fewer studies have explicitly focused on how these factors affect prison adjustment for inmates with prior military experience. We used administrative data provided by the Minnesota Department of Corrections (MnDOC) and employed a series of survival analyses to examine how prior diagnoses of TBI and PTSD (among other risk factors) influence metrics of institutional adjustment and recidivism among a sample of military veterans. Our results indicate that the effects of TBI, PTSD, and other indicators of criminogenic risk are relevant when examining the experiences of justice-involved military veterans-especially with respect recidivism-based outcomes. The implications of our results are discussed and directions for future research are given.

Synthesis of di- and triacrylamides with tertiary amine cores and their evaluation as monomers in dental adhesive interfaces.

PURPOSE/AIM: In an attempt to increase the service life of dental adhesive interfaces, more hydrolytically and enzymatically-stable methacrylate alternatives, such as methacrylamides, have been proposed. The aim of this study was to investigate polymerization behavior, as well as mechanical and biological properties of experimental adhesives containing multi-functional acrylamides. MATERIALS AND METHODS: Multi-functional acrylamides (N,N-Bis[(3-methylaminoacryl)propyl]methylamine - BMAAPMA, Tris[(2-methylaminoacryl)ethyl]amine - TMAAEA, N,N'-bis(acrylamido) 1,4-diazepane - BAADA, N,N-Diethyl-1,3-bis(acrylamido)propane - DEBAAP) or HEMA (2-Hydroxyethyl methacrylate - control) were added at 40 wt% to UDMA. 0.2 wt% DMPA and 0.4 wt% DPI-PF6 were used as initiators. Polymerization kinetics was followed in real-time in near-IR during photoactivation (320-500 nm, at 630 mW/cm2). Water sorption/solubility and flexural strength/modulus were measured according to ISO 4049. 1H NMR was used to assess monomer degradation kinetics. MTT assay was used to assess cytotoxicity against OD-21 and DPSC cells. Biofilm formation and adhesion were assessed by Luciferase Assay and Impingement technique, respectively. Solvated adhesives (40 vol% ethanol) were used to test interfacial adhesion strength. The results were analyzed by ANOVA/Tukey's test (α = 0.05). RESULTS: In general, the pure methacrylate mixture had higher rate of polymerization (Rpmax), degree of conversion (DC) at Rpmax, and final DC than the acrylamides. Flexural properties after water storage decreased between 11 and 65%, more markedly for acrylamides. Interfacial bond strength was greater and more stable long-term for the newly synthesized acrylamide formulations (less than 4% reduction at 6 months) compared to the methacrylate experimental control (42% reduction at 6 months). HEMA degraded by almost 90%, while the acrylamides showed no degradation in acidic conditions. Cytotoxicity and biofilm formation, in general, were similar for all groups. CONCLUSIONS: Despite demonstrating high water sorption, the acrylamide-containing materials had similar mechanical and biological properties and enhanced interfacial bond strength stability compared to the methacrylate control.

Methacrylamide-methacrylate hybrid monomers for dental applications.

OBJECTIVES: The susceptibility of methacrylates to hydrolytic and enzymatic degradation may be a contributing factor limiting the clinical lifespan of resin composite restorations. The elimination of labile ester bonds is a potential advantage of methacrylamides, which have been shown to produce more stable restorative interfaces. The rationale of this study is to design hydrolytically and enzymatically stable adhesive monomers, with the added benefit of being able to form crosslinked networks. The objective of this study was to synthesize difunctional, hybrid methacrylate-methacrylamide monomers, and evaluate them as potential monomers for dental adhesives. MATERIALS AND METHODS: HEMA, TEGDMA (controls) or secondary methacrylamides (HEMAM - commercially available, 2EM and 2dMM - newly synthesized) either bearing a hydroxyl group or a methacrylate functionality (Hybrids-Hy), were added at 40mass% to bisGMA. The photoinitiator system consisted of 2-dimethoxyphenyl acetophenone (DMPA) and diphenyl iodonium hexafluorophosphate (DPI-PF6) at 0.2 and 0.4mass%, respectively. Polymerization kinetics were followed in real-time by near-IR spectroscopy during light activation at 630mW/cm2 for 300s. Water sorption and solubility (WS, SL) were measured according to ISO 4049. Storage modulus in shear (G') for 300s was obtained by oscillatory rheometry. For the microtensile bond strength (µTBS), fully formulated adhesives containing 40vol% ethanol were used to restore caries-free human third molars. Bonded specimens with 1mm2 cross-sectional area were tested after 48h and 6 months storage in water at 37°C. Single bond (SB) was tested as a commercial control. Data were analysed with one-way ANOVA and Tukey's test and Student's t-test (α=0.05). RESULTS: In general, hybrid versions showed lower polymerization rate and degree of conversion, whereas the methacrylate controls, HEMA and TEGDMA, showed the highest values. The hybrid versions showed lower values of WS and SL than their monofunctional versions. HEMAM Hy showed the highest values of G' and TEGDMA, 2EM, and 2dMM-Hy the lowest. The µTBS values between 48h and 6 months were statistically reduced only for the HEMA and both 2dMM materials. The formulation containing the monofunctional methacrylamide (HEMAM) showed only 9% reduction in µTBS after 6 months of aging, while the other groups showed a decrease ranging between 18% and 33%. CONCLUSION: Overall, hybrid monomers showed lower reactivity than their analogous monofunctional versions, but had markedly lower water sorption. Shear storage modulus was affected differently by the addition of the second functionality. HEMAM-containing systems were able to maintain stable long-term dentin bond strength, which demonstrates that bonding stability is a result of the complex interplay among the factors studied. CLINICAL SIGNIFICANCE: The novel monomers showed here are potential alternatives to the current methacrylate adhesives, with selected formulations presenting greater bond stability.

Reversible Atmospheric Water Harvesting Using Metal-Organic Frameworks.

The passive capture of clean water from humid air without reliance on bulky equipment and high energy has been a substantial challenge and has attracted significant interest as a potential environmentally friendly alternative to traditional water harvesting methods. Metal-organic frameworks (MOFs) offer a high potential for this application due to their structural versatility which permits scalable, facile modulations of structural and functional elements. Although MOFs are promising materials for water harvesting, little research has been done to address the microstructure-adsorbing characteristics relationship with respect to the dynamic adsorption-desorption process. In this article, we present a parametric study of nine hydrolytically stable MOFs with diverse structures for unraveling fundamental material properties that govern the kinetics of water sequestration in this class of materials as well as investigating overall uptake capacity gravimetrically. The effects of temperature, relative humidity, and powder bed thickness on the adsorption-desorption process are explored for achieving optimal operational parameters. We found that Zr-MOF-808 can produce up to 8.66 LH2O kg-1MOF day-1, an extraordinary finding that outperforms any previously reported values for MOF-based systems. The presented findings help to deepen our understanding and guide the discovery of next-generation water harvesting materials.

Antibacterial, ester-free monomers: Polymerization kinetics, mechanical properties, biocompatibility and anti-biofilm activity.

OBJECTIVES: Quaternary ammonium (QA) methacrylate monomers have been extensively investigated and demonstrate excellent antibacterial properties. However, the presence of ester bonds makes them prone to degradation in the oral cavity. In this study, ester-free QA monomers based on meth-acrylamides were synthesized and screened for polymerization kinetics, mechanical properties and antibacterial effects. MATERIALS AND METHODS: Tertiary quaternary ammonium acrylamides (AM) and methacrylamides (MAM) with alkyl side chain lengths of 9 and 14 carbons (C9 and C14) were synthesized and incorporated at 10 wt% into experimental composites based on BisGMA:TEGDMA (1:1), camphorquinone/ethyl-4-dimethylaminobenzoate (0.2/0.8 wt%) and 70 wt% barium glass fillers. Analogous methacrylate versions (MA) were used as controls. Degree of conversion (DC) and rate of polymerization (RP) during photoactivation (800 mW/cm2) were followed in real-time with near-IR. Flexural Strength (FS) and Modulus (E) were measured on 2 × 2 × 25 mm bars in 3-point bending after 24 h dry storage and 7-day storage in water at 37 °C. Antimicrobial properties and biofilm adhesion (fouling) were evaluated by bioluminescence (Luciferase Assay) and biofilm removal by water spray microjet impingement test, respectively. Cytotoxicity was assessed by MTT assay on dental pulp stem cells (DPSC). Data were analyzed with one-way ANOVA/Tukey's test (α = 0.05). RESULTS: DC was similar for all groups tested (∼70%). Both MAMs and C14-AM presented significantly lower RP. Under dry conditions, FS (110-120 MPa) and E (8-9 GPa) were similar for all groups. After water storage, all materials presented FS/E similar to the control, except for C14-AM (for FS) and C14-MAM (for E), which were lower. All C14 versions were strongly antibacterial, decreasing the titer counts of biofilm by more than two orders of magnitude in comparison to the control. C9 monomers did not present significant antibacterial nor antifouling properties. And biofilms had approximately equivalent adhesion on the C9 composites as on the control. Cytotoxicity did not show significant differences between the MA and AM versions and the control group. CONCLUSIONS: C14-QA monomers based on methacrylates and meth-acrylamides present strong antibacterial properties, and in general, similar conversion/mechanical properties compared to the methacrylate control. STATEMENT OF SIGNIFICANCE: This work demonstrates the viability of methacrylamides and acrylamides as potential components in dental restorative materials with antimicrobial properties. The use of ester-free polymerizable functionalities has the potential of improving the degradation resistance of these materials long-term. The use of (meth)acrylamides did not interfere with the antimicrobial potential of quaternary ammonium-based materials.

UV-cured gel polymer electrolytes with improved stability for advanced aqueous Li-ion batteries.

We report the development of a new class of "water-in-salt" electrolytes based on UV photopolymerized acrylic polymers. Incorporation of "water-in-bisalt" in a polymer matrix reduces water activity, expands the electrochemical stability window to 4.1 V, and dramatically improves cycle life in full cells with lithium titanate anodes compared to liquid water-based electrolytes.